 jpampwork.com |
TOOLS
Most of our tools here are made in Japan.
Ordering Information
| Mandrels | |||||||||||||||||||||||||||||||||||
 Left to Right A, B, C, D,  E |
BEAD MANDRELS Material : Stainless Steel ( MM size)
|
||||||||||||||||||||||||||||||||||
| C Oval Mandrels 3mm, 4mm, 5mm, by using this mandrel, even round bead, you can make the bead to stay at you want to be the front of necklace |
3mm, 4mm - $5.00 5mm - $6.00 |
||||||||||||||||||||||||||||||||||
| Bigger stainless mandrels Easy to turn, light weighted! D 8mm rod with 4mm mandrel @@ 6mm rod with 3mm mandrel |
8mm- $10.00 10mm- $12.00 |
||||||||||||||||||||||||||||||||||
| E, T-shape Manderls | $12 | ||||||||||||||||||||||||||||||||||
| @ | |||||||||||||||||||||||||||||||||||
 F, G, H, |
Stainless Tube F, G, H (Left to Right) | ||||||||||||||||||||||||||||||||||
| F, H : Round bead tube 6mm x 300mm tube 8mm x 300mm tube 10mm x 300mm tube 12mm x 300mm tube |
6mm $4.50 8mm $5.00 10mm $5.00 12mm $6.50 |
||||||||||||||||||||||||||||||||||
| G : Flat (Oval) bead tube Good for making bead for Obi-jime/Japanese Kimono belt 6mm x 300 flat tube @flat end 3.5mmx7mm 8mmx 300mm flat tube@ @Flat end 4mm10mm 9mm x 300mm flat tube NEW Flat end 7mm x 11mm Good for "Regaliz Oval Leater" 10mm x 300mm flat tube@ @Flat end 5mm13mm 12mm x 300mm flat tube@ @Flat end 6mm x 15mm |
6mm flat -$7.00 8mm flat- $7.50 9mm flat-$8.00 10mm flat- $7.50 12mm@flat- $9.00 |
||||||||||||||||||||||||||||||||||
   |
Easy bend Mandrels * Dip mandrels into bead releas and dry and again dip in bead releas ( thick coating for easy removing bead) After making wide bead, heat bead enough to bend and hold end of mandrels by strong plier and hold closer to bead by hand, then bend beads. after anealing /cool down, cut Mandrels, and dip into water. |
length:500mm 1.2mm-@$2.60/10pc2.0mm-@$3.60/10pc 2.4mm-@$4.20/10pc |
|||||||||||||||||||||||||||||||||
| Tweezers | ||
 Left to RightiΆ©ηj@ I, J, K, L, |
 I: Smal Flat tweezers125mm |
$2.- |
 J : Small Sharp bend tweezers150mm |
$3.- | |
| K :Sharp lock tweezers | $6.- | |
| L :Sharp plier ( Inside flat) 150mm | $7.- | |
| @ | ||
 |
Super tungsten tweezers 150mm $50.- 180mm $55.- perfect for high tempature working in flame or putting Murrini on bead. Rare chance to stick glass to Tungsten. Most profetional lamp worker use this in Japan |
|
 |
Bend Super Tungsten tweezers 180mm same as above but bend. |
$55.- |
| @ | ||
 |
N: Flat tweezers 200mm this flat are welded, not solded so you can work in the flame for short period of time. |
$23.- |
 |
Vittorio Tweezers It is very usefull when you make a fin of a fish or lines of a leaf and petal. |
$55 |
 |
O: Banboo Tweezers This is perfect to hold thin gold or silver leaf and attach to bead. |
$5.00 |
| @ | ||
 LEFT -P, RIGHT-Q (Glass are not included) |
P: Glass rod holder Easy to hold on and off short glass rod. but not storong like Murrini holder. |
$26.00 |
 Q: Murrini HolderThis is good to hold Murrini also good for holding short glass rod. As they are in center, it is easy to turn. |
$30.00 | |
 R, S, T |
R: Lamp working shears |
$21.00 |
| S: Roop Hemo stat with small hole this hole is good to hold thin glass (2mm to 4mm)  |
$24.00 | |
 |
Fire registant cords. you can use this to tweezers or hemo stat. to prevent shock to hot glass. Non-Asbestos |
$1.50/1m |
| Rake, tools | ||
| @ | ||
 |
V: Bead shaper with lake One side is bead shaper, the other side is lake. This is one of the most popular tools in Japan. |
$6.00 |
| @ | ||
 |
Economy lake |
$3.00 |
| @ | ||
 |
Surgical Knife for lampwork good for making dent or small detail sculptual work. Many Japanese lampworker use this tools |
$5.00 |
| Special tool | |||
  |
3D flower drawer rod good for when you make 3D flower. Make flower hot and push by this tool, then put transparent clear glass, then draw flower agan. By continuing this , you can make 3D flower. |
$15.00/SET | |
|
wooden handle handle for above. We recomend to buy 3pc for one set of 3D flower rod. |
$1.00/pc x 3pc | ||
 |
DVD Tonb-dama, $38.- The aobve DVD shows how to use 3D flower rod., how to make bead on the cover. DVD version of "Tonbo-Dama" book. English subtitled @ |
||
| @ | |||
  |
Roller for bead good for making very thin line on bead or good for making/shaping core(cored glass) |
 |
$30.00 |
| other tools | |||
 |
Shainy steel paddle Most Japanese use steel paddle for shaping bead. M@150mm long L@180mm long |
M $10.00 L $11.00 |
|
| @ | |||
 |
Mortar 90mm dia. 120mm dia. It consists of the earthenware , good for make things detailed / Powder. |
90mm@ $6.00 120mm $10.00 |
|
 |
Claw Grabber 300mm length weight not included S-SIZE 35mm-100mm L-SIZE 60mm-165mm |
S-$100 L-$110 |
|
 |
Carbide Tipped Glass Cutter Realy strong and easy to cut. 200mm , 300g |
$30 $25 .- 10 pair $23. - 25 pair |
|
 |
Michael Shaper Must have items when you make oval bead like pictured ¨ 250mm long S- 29mm x 10mm M-36mm x 16mm L-51mm x 24mm |
 Bead made by Michael Barley |
EACH $50 |
 |
Cane maker for lampworking 50x50x55high |
3-$30 5-$33 6-$35 8-$37 |
|
 |
Ring polisher Set Perfect set for polishing Glass Ring 3mm Dark Brown-Blue-Brown-white(felt) with cerium |
$24 | |
 |
Parts Mord Graphite ( Color of item is black now) Perfect fit when you make flower Murrini 50x100x50H 45, 60, 72, 90, degree |
$90 | |
| Murini Heater for JP air torch | ||
 |
Murrini Heater for B8, B10 torches Putting on Japanese torch, you can heat Murrini before putting on bead.@ S 80mm x 60mm M 100mm x 80mm |
S $28.00@ M $31.00 |
| @ | ||
 |
High quality Heater for B8, B10 This is new type. You can put murrini and frit too. Flower Parts or Murrini do not fall down, as there is a Lib inside and outside |
$41.00 |
 |
Electric heater 150w 100-120V Loren Stump like this heater. |
$42.00 |